Frequently Asked Questions (FAQ)
This section addresses the most general and relevant technical questions received by Borum's customer service department.
We hope you will find the information helpful and informative. If you have a relevant question to Borum please mail it to info@borum.as. Thank you.
|
Showing 1-17 of 17 Oil temperature QUESTION:
What will happen to the oil temperature of the hydraulic tank if it exceeds more than 80 degrees centigrade?
Read more How do you operate the Borum Megaroad? QUESTION:
Do you operate the Borum Megaroad the same way that you operate the selfpropelled machines. If not what is the difference?
Read more Application speed QUESTION:
What is the required speed when yo use a Borum 250 / 350 / 500 machine for spray plastic and extrusion?
Read more Thermostats QUESTION:
What is the main reason when the thermostats are malfunctioning? And what will happen to the thermostat in case of failure? How do I repair it?
Read more Combination machine QUESTION:
How does the combination machine (equipped with thermoplastic extruder and pressurized cold paint) work? Read more Self propelled Borum machine vs Borum truck QUESTION:
What is the difference between the self propelled and the borum truck? Read more Gradients for Borum machines Hydrostate on BM 250 QUESTION:
I work with a BM 250 road marking machine and have lately experienced a very slow reaction when starting to drive forward or reverse. What can I do to solve this problem? Read more hydrostate LNX 8 eraser - pins QUESTION:
Concerning the pins for the LNX 8 eraser, does it mean that the 24 pins is most suitable for thermoplastic and the 48 pins more suitable for cold paint?
Read more LNX 8 eraser - lifetime QUESTION:
What is the lifetime of the LNX 8 eraser and how do you use it?
Read more Material consumption
QUESTION:
How many metres can we expect to get from 350 litre machine & a 500 Litre machine per tank load? A) When doing Spray Plastic & B) When doing Thermo Extrusion?
Read more Borum road marking machines
QUESTION:
Is Borum specialised in road marking equipment or do you make other types of equipment?
Read more Ton - liters of cold paint / thermo plastic
QUESTION:
What is the approx total Litres or Gallons per ton of cold paint & Hot Thermo Plastic material?
Read more Material consumption
QUESTION:
Using Hot Thermo Extrusion and making twin lines how many metres per ton can we expect?
Read more Material consumption
QUESTION:
When using our BM C 350 Cold paint machine please give the Approx metres per ton of Cold paint.
Read more Material consumption
QUESTION:
Using Hot Spray Plastic, Twin guns for double line, approx how many metres per ton of Thermo plastic can our BM SP 350 do. We assume this will double up when using one gun!
Read more Material consumption
QUESTION:
What is the consumption per hour for BM T 250-2 and preheaters 2 x ID-600 with PS-15 pump station? We need this for calculating the cost of application.
Read more |